For improved comfort, ergonomics and happiness in your workplace at home

find a dealer

Height-adjustable armrest
Adjustable in height by 10 cm, scaled.
The ISO 10993 is an ISO standard series for the biological evaluation of medical devices.
Design Award of the Federal Republic of Germany
This design award from the Federal Ministry of Economics and Technology was presented for leading international achievements from the field of product design for the first time in 1969, when it went by the name of "Bundespreis Gute Form". Since 2006, the Design Award of the Federal Republic of Germany has been awarded annually for outstanding achievements in the areas of product and communication design and for a selected design personality.
iF DESIGN AWARD
The iF label is recognised worldwide as a quality mark for excellent design.
Lumbar support
Lumbar support, optional. Provides additional support for the lumbar region.
Point-synchronised mechanism
Constant contact with the pelvis during the entire movement. No "shirtdragging" effect.
An abradant and a fabric are subjected to a rubbing motion using the Martindale method. Abrasion resistance is stated in rub cycles. Rub cycles are used as a unit, like grams or centimetres. The fabric is more durable the higher the number of cycles.
red dot design award
The red dot design award is an international design competition that is staged annually, breaking down into the categories of product design and communication design.
Intervertebral discs
An intervertebral disc is a flexible link consisting of fibrocartilage between the vertebrae.
3D arm supports
The armrest top is adjustable by 5 cm in depth and by approx. 3 cm in width without tools. The armrest top is made from soft TPU foam with a pleasant soft feel that is gentle to the skin.
Quality Office
The Quality Office guideline defines quality standards for office furnishings in accordance with the latest ergonomic findings.
Counter chair
Counter chairs are intended specifically for use at checkouts, at counters and reception desks in the retail and wholesale sectors, airports, info points, hotels hospitals and banks.
Footprint
Targets for the sustainability and environmental compatibility of the products are defined in the product development process and the ecological footprint requirements are stipulated as part of the quality assessment. The ecological footprint includes both the recycling rate and an assessment of the energy input.
The American LEED® quality mark (Leadership in Energy and Environmental Design) is the most broadly established certificate on the international market.
DLX® (Duo-Latex) mesh. Breathable 2-ply technology featuring flexible latex fabric for optimum pressure distribution in the seat and back avoids pressure points and promotes circulation.
The Dutch NPR standard (= Nederlandse Praktijk Richtlijn) defines special office chair dimensions for particularly short and tall people.
GS
Klöber office swivel chairs bear the “GS” (safety-approved) seal of approval and fully comply with the relevant standards and guidelines.

CONNEX2 – THE JOY OF SIMPLICITY

Designer: Jörg Bernauer

CONNEX2 – THE JOY OF SIMPLICITY

Designer: Jörg Bernauer
  • Clear and functional form
  • One, two, three - all set! Just three control levers for maximum comfort.
  • Intelligent functions: Point-synchronised mechanism with automatic return force regulation. Spontaneously activated.
  • Easily tidied away: After use, the mechanism returns Connex2 to its default position to keep the table tidy.

Sitting correctly has never been easier: Connex2 and Connex2 high-back conference/boardroom chair are already fulfilling tomorrow’s requirements today: they automatically adapt to every sitter and can be controlled intuitively.

  • Clear and functional form
  • One, two, three - all set! Just three control levers for maximum comfort.
  • Intelligent functions: Point-synchronised mechanism with automatic return force regulation. Spontaneously activated.
  • Easily tidied away: After use, the mechanism returns Connex2 to its default position to keep the table tidy.

Take a seat. Ideally a Connex2

 

  1. Adjust the seat height so that the angle between your thigh and calf is a little more than 90 degrees. Important: your feet must be flat on the ground
  2. Your back must be touching the backrest. The seat depth is correct when you can fit four fingers between the front edge of the seat and the back of your knee whilst leaning against the backrest.
  3. The angle between your upper and lower arm should be about 90 degrees.
  4. The monitor is the correct height when the top line of text on the screen is below eye level with your head tilted slightly.
  5. Sit dynamically and change your working position as often as possible, in other words stand up and move around at regular intervals

 

find a dealer

 

Dynamic seat

The seat moves through three dimensions to encourage movement in a left-right plane and support the natural movement impulse.

Relax while you work

When you lean forward to concentrate on your work the seat moves with you, reducing pressure on the back of your thighs.

The perfect dynamics

Thanks to functions that respond automatically along with a flexible backrest design, dynamic sitting isn’t a problem in any position.

Intuitive controls

The controls come in black as standard, or highlighted in contrasting colours for an additional charge. A backrest bar with integrated armrests is also available as an option.

Lay down your arms

The soft-touch armrests drop down when the chair is pushed into the desk, rounding off the intelligent sitting experience.

More home office heroes

Dealer search

A simple way to find a Klöber dealer near you.

    The Klöber philosophy

     

    Klöber brings a breath of fresh air into the office seating sector This is because Klöber is blazing new trails, with a tendency to think outside the box. That takes courage. Our courage as well as that of our customers. Sure enough, that courage is rewarded. With solutions that reinvent how we sit in the office in a refreshingly different way.